White upholstered platform bed – Give your bedroom a truly unique look by creating an upholstered, platform bed frame. Adding upholstery to these low profile bed frames helps to add visual weight, giving the frame a stroke of color. While adding upholstery increases the style factor, the clean lines of the platform bed make it suitable for modern design. A project of upholstered bed frame allows you to create a personalized piece of furniture, making the bed focal point of the room. Choose a bold, graphic print with high contrast for a dramatic look. Soft, textured fabrics, especially those with luster, lend themselves well to romantic spaces.
Ideas for make white upholstered platform bed frame, measure the width and length of your mattress. Add 2 inches to each of those dimensions. Use these tight measures as guidelines for cutting 2-by-6 tables. Cut two boards equal to your adjusted width and two boards that match your adjusted length. Place the boards together on the floor of a rectangular box spring. Place a thin amount of wood glue on the end of one of the tips of the correct width and join one of the longer boards to create a corner of the bed. Repeat the procedure at the remaining corners. Turn the frame so that the long sides are on the left and right.
White upholstered platform bed frame design ideas, install the nail Gun with 2-inch nails. Also secure your corners by shooting three nails along each corner. Use measuring tape to measure the length of the structure by measuring from the inside edge of the upper board to the inner edge of the lower board. Cut the board 2 by 6 remaining at this length. Apply spray adhesive for the outer face of the frame boards. Wrap the mattress with batting. Use the same method that would be used to wrap a gift. Ensure batting instead by clamping around the inside perimeter of each panel. Adjust the cutting board in step 4 in the center of the bed to create a beam support center.