Simple Wood Platform Bed Plans


Simple wood platform bed is popular in Europe, Scandinavia and Japan. Platform height is the most important decision to make as it determines the overall height when you add the mattress. This makes the mattress an important factor as well. The material used to build the platform bed does not have to be solid wood; plywood works just as well. Determine the desired height of your simple wood platform bed. Construct for the frame of the platform bed with solid wood if the height is less than 11 ½ inches. If it’s more than 11 ½, inches, rip four pieces of plywood with a table round saw or round saw to make the four frame pieces.

Simple wood platform bed plans the width pieces to fit between the length pieces. Put them between the length pieces on each end to form a square or a rectangle, depending on the size of the platform required for the selected mattress. Secure them to each other with either plaster screws or 4-sheath (1½-inch) finish nails. Cut several pieces with a table round saw or circular saw to fit into the frame that supports the platform. Keep them within 24 inches of each other for maximum support. These pieces can either be free floating or attached to the frame. Measure the width and length of the platform frame.

Simple wood platform bed plans, cut the platform from a sheet of plywood and attach it to the frame with 4- penny finish nails. As an alternative, attach a piano hinge to an edge of plywood and the frame with the supplied screws with piano hinge and a variable speed drill and screw tip. This gives access to storage space that would otherwise be unavailable. Arrange as many pieces of solid timber as necessary to cover the top of the frame. These pieces serve the same purpose as plywood mentioned before. Secure the timber to the frame with finish nails or screws.


Comments are closed.